Sawstop TSA-SMG Scale Miter Gauge

Engineered to bring cant-miss accuracy to any table saw, the Scale Miter Gauge (SMG) features a protractor head with a pointer-and-notch alignment mechanism that locks in 181 precise angles. Anchor that to a premium adjustable miter bar and add a heavy-duty extendable fence and micro-adjustable flip stop for making repeated cuts of the same length, and you have a premium miter gauge that will take your woodworking to a whole new level of accuracy.

Standard Equipment:

• Miter Gauge With Extendable Fence
• Dual-Arm Flip Stop
• Reversible Ruler For Main Fence (14-1/4″)
• Reversible Ruler For Fence Extension (18″)
• (1) 24mm Steel Rod
• (2) 38mm Steel Rods
• 3mm Hex Wrench
• 5 mm Hex Wrench

Specifications:

• Angle Range: 90 Left To 90 Right
• Angle Detents: 181
• Miter Bar Dimensions: 3/8″ X 3/4″ X 18″
• Fence Length: 18-1/4″ (Retracted), 31-1/2″ (Fully Extended)
• Fence Height: 2-3/8″
• Miter Slots: T-Shaped – 3/4″ At Top, 1″ At Bottom, 3/8″ Deep
• Weight: 6.2 Lbs

Features:

• The precision protractor head features a pointer and 90 notches in 1 increments each side of 0, including one for 22.5 on each side. In addition, the built-in Vernier scale gives you the ability to fine-tune any angle in 1/10 increments.
• An 18″-long miter bar, made to fit in common 3/8″ x 3/4″ miter slots, uses six adjustable washers to eliminate side-to-side wiggle in the miter slot while ensuring a smooth glide forward and back. A screw-on T-clip at the front of the bar holds the bar level in the miter slot when you pull the head off the table.
• The aluminum fence provides a larger reference for holding workpieces accurately (compared to the head alone), with a telescoping extension that reaches up to 31-1/2″ (34″ with the flip stop). A T-slot in the front face provides a place to attach auxiliary wood fences with T-bolts. The scale on top of the fence can be calibrated to enable making precise crosscuts without having to measure and mark your boards.
• Use the flip stop to make repeated cuts at the same setting for identical project parts. The flip stop indexes on the fence with a tooth-and-notch system that lets you position it in 1/32″ increments. The flip stops dual arms can be set independently at different lengths from the blade or linked together with a rod, all of which can be fine-tuned with a built-in micro-adjuster.